Standard Features

For:

1) LOT PREPERATION
Clearing- all trees and stumps under slab and driveways will be removed. Trees within 10’ of foundation are removed to maintain structural integrity. Selected trees will be removed within 20’of front and rear of home and 10’ on each side of home per customer’s request.
Fill and Grading –Final Grade will meet or exceed the 10yr structural warranty specifications to ensure proper drainage around foundation. Any additional filling and grading will be the responsibility of the homeowner unless otherwise specified.

2) FOUNDATIONS
Design –Beams per design, Piers where needed.

3) FRAMING
Wall Studs – 2”x4” or 2”x6” (per plan) spaced a maximum of 16”on center, exterior and interior walls.
Sole Plate – 2”x4”or 2”x6” (per plan) treated wood and secured with Anchor Bolts Power Actuated Fasteners.
Floor and Ceiling Joists – based on span charts approved by Southern Building Code specifications #2 or #3 Yellow Pine.All floorjoists on 12”centers.
Sub-Flooring – Miller Homes uses top of the line ¾” Tongue and Grooved Plywood Sub-floor, not particleboard.
Rafters - #2or better Pine or Fir 2”x6” with bracing and spacing per industry standards, and Southern Building codes. Maximum spacing at 16”
Structural Beams – Miller Homes utilizes manufactured structural beams instead of doubling or tripling 2x12’s, for proper support that never sags.
Exterior Sheeting- Sealed Oriented Strand Board (OSB) instead of foam board for structural integrity. Entire exterior walls are wrapped in Ty-Vek moisture barrier to help prevent mold.

4) CORNICE
Siding – Hardy Plank siding is used exclusively.
Exterior Trim – Fascia, window and door trim will be Hardy Plank.
Radiant Barrier – Tech Shield radiant barrier roof decking for additional energy efficiency.
Soffit – Hardie Soffit Board with vents where applicable.

5) WINDOWS
Double Pane Low E Windows are standard for Miller Homes.
Safety Glass – Tempered Glass where required.
Window Design – White or Tan divided lite Vinyl windows on front elevation. Single hung without divides on side and rear elevations as per plan. Screens on all operable windows.

6) EXTERIOR DOORS
Front Door – Owners choice per allowance.
Other Exterior Doors- Raised Panel, Half –Lite Fiberglass Doors with 100% acrylic latex paint for entering Breafast Room, Utility, Master Suite, or rear of Living area as per plan.
Weather stripping – All exterior doors shall have Weather Stripping and thresholds.
Garage Doors –Raised Panel Metal with keyed lock. All Garage Doors wired for opener and safety sensors. Unless otherwise specified.

7) INSULATION
R-Factor – walls at R-13 plus 2, sloped ceilings at R-22, Attic R-30.
Hot Walls – All hot walls in attic are insulated.
Patented Baffle System utilized between rafters to ensure proper airflow from soffit vents to ridge vents.
Foam Sealant – A Poly Foam Sealant is applied around all doors and windows and across all sole plates to reduce unwanted air infiltration.

8) SHEETROCK
Gypsum – ½” Wallboard with nailed corner bead.
Rounded Corners – Selected corners maybe rounded “bull nosed” bead.
Green Wall Board – ½” Water resistant ‘Green” Gypsum Wall board used behind Marble Tub and Marble Shower surrounds.
Hardie Board –Waterproof Hardie Backer Wallboard used behind Tiled Tub and Shower Surrounds.
Finish – All Wallboard will be taped and floated and sanded to a smooth finish.

9) BRICK
Brick by Acme, Western, Master or Boral Brick (or equal) utilizing galvanized brick ties and machine blended gray Mortar Mix.

10) ROOFING
Shingles – Class A Fire rated 30 year Shingles nailed, not stapled, over 15 pound asphalt felt.

11) ATTIC VENTILATION
Ridge Vents – Ridge Master plus Baffled type for superior ventilation.
Soffit Vents – Continuous running soffit vents in all applicable areas.

12) CEMENT FLATWORK
Driveway - for Front entry Garage width will be 18’ wide for 20’ in front of Garage door, Note: this is a standard feature for Lots with 40’ building lines.
Sidewalks – Begin at front entrance and curve or angle across front elevation to driveway per plan. Sidewalk will be 3’ wide.
Pads – Poured cement pads for air-conditioning unit(s).
Exterior Stoops – 4’x5’cement stoop is provided at all rear and side door entrances.

13) PAINT AND TEXTURE
Exterior Paint – All Hardie Plank siding, fascia, soffit, and trim are primed with 100% acrylic exterior gloss latex paint.
Interior Wall Paint – One, light/neutral color interior flat latex paint. (Dark colors at an additional Charge)
Interior Ceiling Paint – Interior flat white latex paint.
Interior Trim – All interior trim and doors are painted with white enamel over a lacquer undercoat.
Wall Texture – All painted walls, excluding closets are finished with a hand rolled texture.
Ceiling Stomp – Custom medium stomp finish on ceilings, excluding closets.

14) INTERIOR FEATURE
Interior Doors - Raised Panel hollow core trimmed with 3½” finger jointed casing. Three-hinge style is used to help prevent door warpage.
Interior Locks and Door Hardware – Kwikset (or Equal) brand Standard finishes, standard knob, interior passage and privacy lock with Lifetime warranty. Privacy locks installed on all bedrooms and primary bathroom doors.
Exterior Locks and Door Hardware – Kwikset (or Equal) brand polished brass, antique nickel; oil rubbed bronze (* finish is not guaranteed on oil rubbed bronze products) or brushed nickel handle sets on front door. All other exterior doors to have keyed security standard finishes with matching thumb latch deadbolts. Lifetime warranty mechanism.
Trim Material – Baseboards, door jams, casing, window stool, crown molding, and shoe molding, are made of wood MDF material is limited to closet shelving and other dry area shelving. Crown molding and optional chair rail may be MDF material. All interior trim is sprayed with lacquer primer and has a topcoat of semi-gloss white paint.
Crown Molding – Standard in Dining Room, and Great Room, (as per plan)
Kitchen Cabinets and Vanity Cabinets – Custom Oak flat panel or slab stained in Kitchen, balance of cabinets painted, sprayed with lacquer primer and has a topcoat of semi-gloss white paint.
Kitchen Countertops – Two choices for standard counter tops: Natural Granite, Non porous Silestone (or equal) countertops. With standard bull nose edge. Per Allowance
Bathroom Countertops – Custom fitted cultured marble in a wide vanity of Standard colors with a 4” backsplash against adjoining walls. Per Allowance
Linen Closets - Standard 5 shelves in most plans.
Mirrors - 38” high with varying widths per plan. Master Bath mirrors are custom trimmed in wood and painted, Secondary Bathroom mirrors installed with clear plastic clips. Beveled Edging is an extra expense.
Closet Shelving - 1”x12” MDF installed on 1”x2” shelf cleats with metal clothes rod supports and wood clothes rod standard for Upper rod. Lower rod with out shelf is standard. Master Bedroom will have 1 custom-built shelf stack of MDF. Additional shelf stacks available at a nominal charge.

15) FLOOR COVERING
Tile Floor - Per Plan, Per allowance
Wood Floors – Per Plan, Per Allowance
Carpet – Per Plan, Per Allowance

16) PLUMBING
Master Bath Tub –Cultured Marble Jacuzzi. Fixtures include Moen Brantford Series Chrome Tub faucets and matching levers.
Secondary Bath – 5’ with over steel with Moen Brantford Series Chrome pressure balanced tub and shower faucets.
Master bath Shower – Utilizing heavy duty solid cultured marble (not acrylic) pans. Each shower will be trimmed with Moen Brantford series Chrome faucet and lever. Miller Homes shower doors are clear safety glass with chrome or chrome metal trim.
Lavatory Faucets – Moen Brantford Series Chrome.
Commodes – All commodes are Toto (or Equal) elongated bowls with 1.6 gallon flush.
Tub and Shower Surrounds – Low Maintenance cultured marble tub and shower enclosers in your choice of standard colors. We offer the new satin finished marble Ogee edges standard.
Kitchen Sink – Stainless Steel with Moen Brantford Series faucet and spray. A 1/3 horsepower Whirl away disposal (or Equal) is standard.
Natural Gas – (where available) piping in black steel to range, water heater, Dryer, Heating Unit(s), and fireplace.
Water Heaters – 1 Tankless or 50 Gallon Gas Water Heater.
Hose Bibs – Three outside hose bibs will be standard.
Water Piping – Pex is Standard.

17) ELECTRICAL
Code – All homes wired per the most recent Building Codes utilizing all copper wiring.
200 amps – services is standard
Telephone Jacks – 4

TV Hookups - 4

18) LIGHTING
Interior Lighting – Per plan, Per Allowance
Exterior Lighting - Per Plan, Per Allowance

19) HEATING AND AIR CONDITIONING
HVAC – Fully matched and professional designed systems featuring energy saving natural gas heating (where available) and Lenox brand 14 S.E.E.R. rated air conditioning.
Ductwork – Energy Efficient Flexible R-6 ductwork fully sealed.
Air Returns – Properly sized air returns are standard, with an additional return in the master bedroom and the other bedrooms where possible.

20) SECURITY SYSTEMS
Prewire for Security Systems – All homes are pre-wired for security system as a standard feature. This includes wiring all window and exterior doors. A centralized keypad and motion detector are pre-wired as well.

21) APPLIANCES
Built-In Appliances – Per Plan, Per Allowance
Non Built-In Appliances – Per Plan, Per Allowance

Please Note: With constant changes in the building industry, Miller Homes reserves the right to substitute or change any product for an equal or improved product. All customers under contract will receive what has been contracted.